Leatherman Mut Molle Sheath Multitool

The Leatherman MUT is the first multi-tool that functions as both a tactical and practical tool for military, LE, or civilian shooters.

The MUT features multiple areas on the tool threaded for cleaning rods and brushes and all the screwdriver bits are sized for standard military and civilian sighting adjustment work. Also built into the design of the tool is the flexibility to replace the most commonly used parts on the spot, using a simple Torx #8, keeping down-time to a minimum.

With all this, a MOLLE sheath and scope adjustment wrench included, the Leatherman MUT may very well be the most efficient and useful piece in your kit.


Features:

- Conveniently store Leatherman tool bits in the handle of your multi-tool for easy access in the middle of a job, or for safe keeping when not in use.

- Compatible with the MUT and MUT EOD, this strong, lightweight, and removable titanium pocket clip attaches the tool to a pocket, belt loop, or strap system.

- Every feature on this tool can be opened and operated with one hand.

- This enables the user to keep the other hand free for situations that require multi-tasking or a free hand.

- A die cast pinching tool with an angled nose for holding or manipulating materials, ideal for small objects or tight spaces.

- A die cast pinching tool for holding or manipulating materials.

- Replaceable bypassing cutting blades crafted from 154CM, meant for cutting regular and light-gauge wire.

- 154CM will keep its edge three times as long as traditional stainless steel for less down-time in the field.

- Replaceable bypassing cutting blades crafted from 154CM, meant for cutting hard wire.

- 154CM will keep its edge three times as long as traditional stainless steel for less down-time in the field.

- Concave cutters located under plier jaws for use on Stranded wire - smaller gauge wire bundled or wrapped together to form a larger conductor.

- The concave shape helps to keep the shape of the strands without crushing them.

- Found in the jaw of the tool and used for general purpose crimping of electrical connectors.

- A knife made from 420HC stainless steel with a half straight and half serrated edge.

- This style of blade gives the user a choice of precise cuts using the plain section, or cutting through fiber and rougher material using the serrated area.

- A toothed tool made from 420HC stainless steel that is designed to work on a pull motion, which requires less effort and has less propensity for breakage.

- The open-tooth design keeps the saw from filling up with material, allowing the user to complete a job without pausing to clean the tool.

- A replaceable v-notch cutter ideal for cutting through straps, seatbelts, canvas, and other fabric-based materials.

- This hammer can be used for pounding a tent stake, striking a nail, or other uses.

- It features a textured end to reduce contact slippage.

- This tool allows the user to manually eject a jammed round in an AR-15 platform rifle by removing the magazine, placing this stainless steel hook into the ejection port, and pulling back sharply.

- For use when the charging handle has been rendered dysfunctional.

- A replaceable bronze tool for removing carbon buildup from the bolt tail and bolt carrier of a firearm.

- Bronze is used because it is softer than steel and wont cause damage to the bolt carrier group parts while scraping.

- A cleaning rod and brush adaptor for the male end of firearm cleaning kits with an 8mm diameter and 32 threads-per-inch.

- A thin, replaceable punch that threads onto a multi-tool, allowing the user to punch out the pins on and disassemble a firearm.

- This tool features a one way gate and allows for easy clipping to a belt loop or strap.

- It can also be used to pop the top on a favorite beverage.

- This driver slot holds any of the full-size Leatherman tool bits in place and allows the user to exchange bits for different jobs.

- Not intended for the eyeglass screwdriver tip.


Specifications:

- Primary Blade Length: 3 in | 7.6 cm

- Closed Length: 5 in | 12.7 cm

- Weight: 11.2 oz | 317.5 g

- An improved, high-carbon (HC) form of 420 stainless steel that works well with high production tooling.

- 420HCs strength is optimized in Leatherman multi-tools by heat treatment.

- A high carbon, high alloy, and corrosion resistant stainless steel that holds its edge three times as long as 420 stainless steel.

- This steel is used on some premium Leatherman knife blades.

- Bronze bushings are used in most Leatherman multi-tools with outside accessible tools. Located at pivot points, bushings allow a much smoother opening.

- Bronze is also used in specific tools such as the carbon scraper on the MUT and MUT EOD, where a slightly softer metal is preferred so it wont scar other parts during use.

- A lightweight, lustrous and corrosion resistant transition metal used in some Leatherman tools.

- Titanium has similar properties to steel but only 60% of its density, making tools lighter for every day carry.

- Black oxide is a powder-based metal coating.

- for situations where giving away a position would be costly, it is widely used by the military for its effectiveness in reducing glare and reflection.

Now you can place your order without having to leave your house with trekkinn, your online store specialized in outdoor material. We want you to enjoy your leisure time in a unique way and so we offer the biggest selection in Tools and knives products of Leatherman. Inquire the outdoor products that are listed like Leatherman Mut Molle Sheath Multitool designed to give you complete comfort while you are exercising your favourite sport or your daily activities.