Plastimo Performance Uninflated with Rope Fender

Automatic translation View in original language

I have purchased the 23cm X 85cm fenders. plastino and the pastino brand valve adapter. Will I be able to inflate them with the usual foot pump?

He comprado las defensas de 23cm X 85cm. plastino y el adaptador de valvula de la marca pastino. Podré hincharlas con el hinchador de pié de toda la vida??

Answer of Jean-Paul Dutrey

Answer of Jean-Pierre

No problem. The ideal pressure is 0.2 bar so with a foot pump it works.

Pas de problème. La pression idéale est de 0,2 bar donc avec une pompe à pied ça marche.

Automatic translation View in original language

how do I inflate it? what do I need?

come faccio a gonfiarlo? cosa mi occorre?

Answer of Marcel Dettmer

Answer of Dominique

Hello, I first inflated it with a needle to inflate the balloons but you have to be very quick to screw it back in because it deflates a little when you remove the needle. Then I bought the Plastimo valve connector: Unscrew 3/4 of a turn, inflate to the right pressure and screw again. It´s more practical but the fixing could be improved.

Bonjour, Je l´ai tout d´abord gonflé avec une aiguille pour gonfler les ballons mais il faut être très rapide pour le revisser car il se dégonfle un peu quand on retire l´aiguille. Puis j´ai acheté le raccord pour valve Plastimo : On dévisse de 3/4 de tour, on gonfle à la bonne pression et on revisse. C´est plus pratique mais la fixation mériterait d´être améliorée.

Answer of Geir

I loosened the valve a bit by screwing (grooves in the valve) with a regular air gun

Jeg løsnet ventilen litt ved å skru (spor i ventilen) så vanlig trykkluftpistol

Automatic translation View in original language

Good Morning. I bought this product and received. Now I´m having trouble filling it up. This is because the filling system requires an adapter tip for the valve that did not come with the product and also does not say on your website how to find it. I would like to know how to fill the fender since the tip does not come with the float nor is it sold on your website nor is there any reference to it. How can I fill the fender without the adapter?

Bom dia. Comprei este produto e recebi. Agora estou com a dificuldade em encher. Isto porque a sistema de enchimento requer uma ponteira de adaptador para a válvula que não veio com o produto e também não diz no vosso site como a conseguir encontrar. Gostaria de saber como encher a defensa uma vez que a ponteira não vem com a boia nem vende no vosso site nem é feita nenhuma referecia a tal. Como posso encher a defensa nao tendo o adaptador?

Answer of Maria del mar Callejón Amorós

Answer of Jordi

Good morning, the same thing happened to me and I went to a Chinese store and bought one of those tips to inflate balls but it did not fit the gun that I had to blow air... so I tried to inflate directly with the air gun with a compressor and I did well. An adapter with a 14 mm sleeve diameter is this: https://www.tradeinn.com/waveinn/es/nuova-rade-adaptador-de-inflacion-100/138352848/p

Buenos dias, a mi me paso lo mismo y fui a un chino y compre una punta de esas para inchar pelotas pero no se adaptaba a la pistola que tenia de soplar aire… entonces probé de hinchar directamente con la pistola de aire con un compresor y me fue bien. Un adaptador con diámetro de 14 mm de manga es este: https://www.tradeinn.com/waveinn/es/nuova-rade-adaptador-de-inflacion-100/138352848/p

Automatic translation View in original language

Good day. Are the 60cm total length?

Guten Tag. Sind die 60cm Gesamtlänge?

our experts answer

Hello, yes they are. Regards.

Hallo, ja, das sind sie. Grüße.