`Remember me on this computer` option
Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.
View more related products to:
Features:
- DC connector: Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
- Less maintenance and aging when the battery is not in use: the Storage Mode: The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to equalize the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
- Five LEDs for status and mode indication: When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge
profiles with the MODE button:
- Current limited t0 0,8A and 14,4V absorption voltage. The red LED <14Ah will be on.
- Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
- Current 4A and 14,7V absorption voltage. The red LED COLD will be on.
Application:
- Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).
- Until the battery is fully charged, the red LED CHARGE will be on.
- After completion of the charge process, the red LED FULL will be on.
- In case of reverse polarity connection, the red LED ! will be on
- If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is
interrupted.
- The charger always starts in STANDBY mode when connected to the AC supply.
Specifications:
Input voltage range : 200-265 V
Frequency: 50/60Hz
- Charge voltage absorption: 14,4 or 14,7 V
- Charge voltage float: 13,6 V
- Charge voltage storage: 13,2 V
- Charge current : 4 A or 0,8 A
- Can be used as power supply: No [output relay]
- Back current drain: 0,25 Ah/month (0,3 mA)
- Protection: Reverse polarity, temperature
- Operating temp. range: -20 to +40°C (full rated output up to 25°C)
- Humidity (non condensing): Max 95 %
ENCLOSURE:
Material: PC
- Battery-connection:
- Black and red cable of 1,2 meter.
- Connects to battery clamps, M6 eyelets or 12 V plug (included)
- 230 V AC-connection: Cable of 1,5 meter with CEE 7/7 plug
- Protection category: IP65
- Weight: 0,56 kg
- Dimensions (h x w x d): 42 x 61 x 185 mm
Buy now your Victron energy Automotive IP65 Charger 12V/4A-12V/0.8A Converter for only 0 $. Made by Victron energy, Victron energy Automotive IP65 Charger 12V/4A-12V/0.8A Converter is available in a range of sizes and colours, and comes complete with everything you´ll need. At waveinn, we offer the best price of your favourite nautical and fishing products. View our full range of Converters within our Electronics department.
Write a review about this product and earn CoINNs
Write a review about this product
Tradeinn Retail Services as the data controller will process your data in order to respond to your query or request. You can access, rectify and delete your data, as well as exercise other rights by consulting the additional and detailed information on data protection in our Privacy Policy.
30-DAY
EASY & FAST RETURN
SECURE & SAFE
SHOPPING
SATISFACTION
100% GUARANTEED
LOWEST PRICES
GUARANTEED
Related products
$175.99
$6.49