Victron Energy MPPT Control

Features:

- Communication cable: Connect the MPPT Control to the BlueSolar MPPT Charge Controller with a VE.Direct cable.
- Power cable with inline fuse: Wiring the supplied power cable is only necessary when the used MPPT is an MPPT 75/50, 100/50 or 150/35, and its part number starts with SCC01. These earlier versions shut down at night. In this case, use the fusedpower cable to power the MPPT Control
straight from the battery. This way, the MPPT Control stays powered while the MPPT is off, and the last received status, history and settings of the MPPT can be viewed when the sun is down. Wiring this power cable is not necessary for all other models, neither for the SCC02 or later versions of the three mentioned models.
- Wall mount enclosure: Optional wall mount enclosures are available to easily mount the MPPT control on a wall, instead of flush mounted through a panel.


Specifications:

MPPT Control:
- Supply voltage range: 6,5 -95 VDC (Battery powered)5V (VE.Direct powered)
- Current draw, back light off: < 4 mA
- Operating temperature rang: 20 -+50°C (0 -120°F)
Supported MPPTs:
- Models: All models with VE.Direct port, except the BlueSolar MPPT 70/15
- Software version: All software versions>= 1.12
INSTALLATION & DIMENSIONS:
- Installation: Flush mount
- Front: 63 mm diameter
- Front bezel: 69 x 69 mm (2.7 x 2.7 inch)
- Body diameter: 52mm (2.0 inch
- Body depth: 31mm (1.2 inch)
ACCESSORIES:
- Cables (included): cable with fuse for battery powered operation

Order now your Victron energy MPPT Control and receive it at home in a few days. In addition, you can choose different sizes and colors for Victron energy MPPT Control, this way it adapts to your needs. At this moment Victron energy MPPT Control is in stock and the price is 0 $. With our variety of Instruments articles, you can find everything you need at one place.