Fusion Signature Series Marine Amplifier

EXPERIENCE THE POWER OF MUSIC
Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive protection from the environment available — delivering a Signature performance out on the water.

- Class-D amplifier design delivers higher efficiency and greater output.
- Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power.
- Conformal coated PCBs provide extra protection from the marine elements.
- Rigid aluminum alloy heat sink is molded for greater dissipation of heat.
- The amplifiers are available in monoblock, 4 channel, 5 channel, 6 channel and 8 channel configurations.
- Engineered to last season after season, the amplifiers include a supported 3-year warranty.

DESIGNED AND ENGINEERED TO TRUE-MARINE™ STANDARDS:

- Built on the True-Marine design philosophy from Fusion, the Signature Series amplifiers have been tested to a high level of protection against salt fog, temperature, vibration and UV.

CLASS-D AMPLIFIER TECHNOLOGY:

- The highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for a whole new level of audio performance.

SUPERIOR SYSTEM PERFORMANCE:

- The Signature Series amplifiers feature built-in variable bass boost, a subsonic filter and variable low/high pass crossover filters for superior performance and enhanced system protection.

MARINE-READY DESIGN WITH CONFORMAL COATED PCBS:

- Helping to extend the life of your amplifiers, the Signature Series amplifiers are designed with conformal coated PCBs to provide extra protection from the marine elements.

RIGID ALUMINUM ALLOY HEAT SINK:
- For increased efficiency, the rigid aluminum alloy heat sink is molded to form a singular die-cast chassis. The fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation.


STAINLESS STEEL MIRROR FINISH:
- The polished stainless steel control panel cover conceals and helps protect all cable connections and settings controls while providing an attractive finish to complement any installation.

General:

- Physical dimensions (LxWxH): Monoblock/ and 4/5 channels: 11.81 x 8.27 x 1.97 (300 x 210 x 50 mm)
6/8 channels and 24-Volt 6 channel: 16.54 x 8.27 x 2.24 (420 x 210 x 57 mm)
- Amplifier class: D
- Peak power (Watts):
- Monoblock: 2250 W
- 4 channel: 1400 W
- 5 channel: 1600 W
- 6 channel/24-Volt 6 channel: 1500 W
- 8 channel: 2000 W

- Total rated power output - 4 Ohm (Watts) Monoblock: 500 W RMS x 1 @ 14.4 V input - 4 Ohm < 1% THD
- 4 channel: 150 W RMS x 4 @ 14.4 V input - 4 Ohm < 1% THD
- 5 channel: 80 W RMS x 4 + 250 W RMS x 1 @ 14.4 V input - 4 Ohm < 1% THD
- 6 channel: 100 W RMS x 6 @ 14.4 V input - 4 Ohm < 1% THD
- 8 channel: 100 W RMS x 8 @ 14.4 V input - 4 Ohm < 1% THD
- 24-Volt 6 channel: 100 W RMS x 6 @ 28.8 V input - 4 Ohm < 1% THD
- Total rated power output - 2 Ohm (Watts) Monoblock: 850 W RMS x 1 @ 14.4 V input - 2 Ohm < 1% THD
- 4 channel: 220 W RMS x 4 @ 14.4 V input - 2 Ohm < 1% THD
- 5 channel: 130 W RMS x 4 + 330 W RMS x 1 @ 14.4 V input - 2 Ohm < 1% THD
- 6 channel: 140 W RMS x 6 @ 14.4 V input - 2 Ohm < 1% THD
- 8 channel: 140 W RMS x 8 @ 14.4 V input - 2 Ohm < 1% THD
- 24-Volt 6 channel: 140 W RMS x 6 @ 28.8 V input - 2 Ohm < 1% THD
- Total rated power output (Watts)
- Monoblock: 1100 W RMS x 1 @ 14.4 V input - 1 Ohm < 1% THD
- 4 channel: 440 W RMS x 2 @ 14.4 V input - 4 Ohm Bridged < 1% THD
- 5 channel: 250 W RMS x 2 @ 14.4 V input - 4 Ohm Bridged < 1% THD + 250 W RMS x 1 @ 14.4 V input - 4 Ohm < 1% THD
- 6 channel: 280 W RMS x 3 @ 14.4 V input - 4 Ohm Bridged < 1% THD
- 8 channel: 280 W RMS x 4 @ 14.4 V input - 4 Ohm Bridged < 1% THD
- 24-Volt 6 channel: 280 W RMS x 3 @ 28.8 V input - 4 Ohm Bridged < 1% THD
- Frequency response Monoblock Amplifier: 10 Hz - 320 Hz (-3 dB, dB @ 4 Ohm rated power) - subwoofer only
- 4/5 channels: 10 Hz - 50 kHz (-3dB, dB @ 4 Ohm rated power)
- 6/8 channels: 10 Hz - 40 kHz (-3dB, dB @ 4 Ohm rated power)
- 6/8 channels and 24-Volt 6 channel: 10 Hz - 40 kHz (-3dB, dB @ 4 Ohm rated power)
- Input sensitivity: 0.3 V - 8 V RMS (user adjustable)
- Input impedance: Monoblock/5 channel: 4k Ohm nominal
- 4/6/8 channels and 24-Volt 6 channel: 7k Ohm nominal
- High-pass/low-pass full range filter yes (user selectable)
- HP variable crossover frequency Monoblock: 10 Hz - 80 Hz (subwoofer)
- 4/5/6/8 channels and 24-Volt 6 channel: 32 Hz - 320 Hz
- LP variable crossover frequency Monoblock: 32 Hz - 320 Hz (subwoofer)
- 4/5/6/8 channels and 24-Volt 6 channel: 32 Hz - 320 Hz
- Bass boost 0 dB - 9 dB, user adjustable (zone 3 only)
- Operating voltage: Monoblock and 4/5/6/8 channels: 10.8 V - 16 V DC
- 24-Volt 6 channel: 21.6 V - 32 V DC
- Current consumption (StandBy) Monoblock and 4/5/6/8 channels: < 1 mA @ 14.4 V input
- 24-Volt 6 channel: < 1 mA @ 28.8 V input
- Current consumption (Idle) Monoblock and 4/5/6/8 channels: < 2.5 A @ 14.4 V input
- 24-Volt 6 channel: < 1.25 A @ 28.8 V input
- Current consumption (Max) Monoblock: 120 A
- 4/5 channels: 80 A
- 6 channel: 75 A
- 8 channel: 100 A
- 24-Volt 6 channel: 35 A
- Fuse rating: Monoblock/6 channel: 3 x 40 A ATC blade-type (SAE J1171 compliant)
- 4/5 channels: 2 x 40 A ATC blade-type (SAE J1171 compliant)
- 8 channel: 4 x 40 A ATC blade-type (SAE J1171 compliant)
- 24-Volt 6 channel: 3 x 20 A ATC blade-type (SAE J1171 compliant)
- Operating temperature range 32° to 122° F (0° to 50° C)

In the box:

- One amplifier (based on what you select)
- Four 8-gauge, self-tapping screws
- 3 mm hex key (for the top cover and power terminals)
- 2.5 mm hex key (for the speaker terminals)
- Polishing cloth

Compatible devices:

- Fusion Apollo™ RA670
- Fusion Apollo™ RA770
- Fusion Apollo™ WB670
- Fusion BB100 Black Box
- Fusion EL Series Marine Speakers
- Fusion FM Series Marine Speakers
- Fusion FM Series Marine Subwoofers
- Fusion MS-RA60 Marine Stereo
- Fusion RA210 Marine Stereo
- Fusion RA70 Series Marine Stereos
- Fusion Signature Series 3 Marine Speakers
- Fusion Signature Series 3 Marine Subwoofers
- Fusion Signature Series 3 Marine Wake Tower Speakers
- Fusion XS Series Marine Speakers Fusion® XS Series Marine Subwoofers

If you want to know more about Fusion Signature Series Marine Amplifier or other products of the brand Fusion in the Electronics category at waveinn, you are lucky because we have a big offer in various products so that you can realize your nautical and fishing activities with the best equipment. Don´t forget to also check out our Audio collection, you can choose nautical and fishing products from Fusion, one of the biggest brands in the industry.