Albatross NMEA0183 to RS422 Converter

ACTISENSE GATEWAY: USB TO SERIAL RS422/N USG-1-422 for NMEA0183



The Actisense USG-1 is the safest way to connect a boat´s data network to an on-board PC. It converts a USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus.

The ISO-Drive output and OPTO input provide full isolation, making installation simple and free from ground loops.

The OPTO input uses the Actisense isolation circuitry to protect any connected equipment from most common system faults. The isolator can receive very low level differential signals that are often too small to be received by a PC serial port.

The USG-1 overcomes all the problems of using a low-cost USB to RS232 cable from a computer store (when handshaking is not required). It eliminates the risk of damage to the PC as it provides complete isolation.

Benefits of the USG-1:

Create a serial port connection to an NMEA 0183 system, that may be on a different power circuit from the PC

Connect two PCs together that are on different power circuits

Provide a compliant NMEA 0183 port from a USB port

Receive low level differential signals that are too small to be received by a PC serial port

Free up PC serial/COM port for other uses

Albatross NMEA0183 to RS422 Converter is a product that corresponds to the Communication category within Electronics selection at your nautical and fishing store, waveinn. Wait no more and learn about all the advantages belonging to the community of waveinn. What are the advantages of Albatross NMEA0183 to RS422 Converter? This product is designed specifically to provide good support and entirely based on our passion for nautical and fishing.