Blue Sea Systems Block Classt IP Fuse

Specifications:

- Four Stud Design Provides Ample Access Around Connecting Stud To Install Large Cable Lugs Without Obstruction From The Fuse
- Insulating Cover Satisfies Abyc/Uscg Insulation Requirements
- Cover Breakouts Allow Wire Access In Any Direction
- Stud Design Ensures Secure Fuse Mounting Even With High Heat
- Stainless Steel Studs Provide Resistance To Corrosion And High Torque
- One-Piece Stainless Flange Nuts Ensure Safe And Secure Connections
- Ul 94-V0 Base Resists High Heat
- Ignition Protected

- Cable Size: Up To 4/0 Awg
- Ignition Protected Devices, Which Operate In A Potentially Explosive Environment, Must Be Ignition Protected. This Would Include Engine Rooms With Gasoline Engines. There Is A Very Specific Set Of Tests Which A Device Must Pass To Claim Ignition Protection. They Include Operating Safely In An Explosive Mixture Of Propane And Air.: Yes
- Maximum Amperage Maximum Amperage Ratings Are Dependent On Use Of Appropriately Sized Fuses And Wire For A Given Application.: 320a Best Practice: Limit The Amount Of Current In The Circuit To 80% Of The Fuse Rating.
- 300a If Inside Engine Space And Continuous Best Practice: Limit The Amount Of Current In The Circuit To 80% Of The Fuse Rating.
- Maximum Voltage: 160v Dc
- Fuse Mounting Blocks: Tin-Plated Copper
- Mounting Fastner Size: 1/4´´ Or M6 Hardware
- Terminal Stud Size: 5/16´´-18 (M8)
- Weight: 1.10lb (0.5 Kg)