Jabsco Driving 7273-0003 Maxi Puppy Pump

Jabsco Maxi Puppy 3000 can be mounted on any flat surface. Fit the pump in a dry, well ventilated position where there is full access for service. If installed in a vertical position the motor must be above the pump head. Use the rubber grommets provided to minimise vibration, do not overtighten the mounting screws.

Secure 25mm (1”) id hose either direct to the discharge ports or to ½” BSP male threaded fittings using stainless steel hose clamps. Use spiral reinforced hose (with a smooth internal bore) that will not collapse under suction, or rigid or semi rigid pipework systems. The pipework must be compatible with the liquid being pumped. Pipe runs should be kept as straight and short as possible, avoiding rising and dipping over obstructions. Fit a strainer on the inlet hose to prevent larger debris from entering the pump


Features:

Continuous rated, heavy duty pumps for bilge and general purpose use:
- ISO 8846 MARINE (Ignition protection).
- ISO 8849 MARINE (Bilge pump standard).
- Small bilge debris present no problem to these bronze bodied, flexible impeller pumps.
- Simple design means fewer wearing parts.
- Self priming to 2.4m (8 ft).

Are you thinking of buying Jabsco Driving 7273-0003 Maxi Puppy Pump? This is one of the star products at waveinn, the online nautical and fishing store. The price is 60.49 $, limited time! At waveinn you can benefit from the biggest advantages and find products from Jabsco at the best price. All our nautical and fishing products have a manufacturer quality guarantee.