Victron Energy Automotive IP65 Charger 12V/4A-12V/0.8A Converter

Features:

- DC connector: Depending on the application, clamps, eyelets or a cigarette plug (all included) can be connected to the charger.
- Less maintenance and aging when the battery is not in use: the Storage Mode: The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 13,2 V to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulphation, a major cause of early battery failure.
- Protected against overheating and reverse polarity connection The output current will reduce as temperature increases up to 40°C, but the charger will not fail. Output relay protects against reverse polarity connection.
- Five LED’s for status and mode indication: When connected to the AC supply the STAND-BY LED will turn on. No voltage will be present at the output. After connection to a battery (battery voltage must exceed 8,5V), a choice can be made out of three charge
profiles with the MODE button:
- Current limited t0 0,8A and 14,4V absorption voltage. The red LED <14Ah will be on.
- Current 4A and 14,4V absorption voltage. The red LED >14Ah will be on. Application: Flooded, AGM or GEL batteries. Ambient temperature 10-35°C.
- Current 4A and 14,7V absorption voltage. The red LED COLD will be on.
Application:
- Flooded, AGM or GEL batteries. Ambient temperature below 10°C, or batteries requiring a higher charge voltage (OPTIMA spiral cell batteries for example).
- Until the battery is fully charged, the red LED CHARGE will be on.
- After completion of the charge process, the red LED FULL will be on.
- In case of reverse polarity connection, the red LED ! will be on
- If the red LED STANDBY remains on, even after pressing the MODE button, the connection to the battery is
interrupted.
- The charger always starts in STANDBY mode when connected to the AC supply.


Specifications:

Input voltage range : 200-265 V
Frequency: 50/60Hz
- Charge voltage absorption: 14,4 or 14,7 V
- Charge voltage float: 13,6 V
- Charge voltage storage: 13,2 V
- Charge current : 4 A or 0,8 A
- Can be used as power supply: No [output relay]
- Back current drain: 0,25 Ah/month (0,3 mA)
- Protection: Reverse polarity, temperature
- Operating temp. range: -20 to +40°C (full rated output up to 25°C)
- Humidity (non condensing): Max 95 %
ENCLOSURE:
Material: PC
- Battery-connection:
- Black and red cable of 1,2 meter.
- Connects to battery clamps, M6 eyelets or 12 V plug (included)
- 230 V AC-connection: Cable of 1,5 meter with CEE 7/7 plug
- Protection category: IP65
- Weight: 0,56 kg
- Dimensions (h x w x d): 42 x 61 x 185 mm

Are you looking for Victron energy Automotive IP65 Charger 12V/4A-12V/0.8A Converter? At waveinn you will find all types of Converters products from the best brands. For example from Victron energy, a leading brand in the industry and guarantees you the best manufacturing quality. Do not wait any longer and equip yourself with products from our nautical and fishing store.