Victron Energy Phoenix 48/5000 Battery Inverter

The Victron Phoenix Inverter 48V 5000VA is responsible for extracting the energy stored in the batteries connected to it and converting it into single-phase current suitable for consumption.

This Inverter Victron Phoenix 48V 5000VA requires batteries that correspond to their nominal working voltage to operate.

The Victron brand is a leader in the development of power inverters for all types of uses.

The entire Phoenix range are inverters with the ability to communicate with the monitoring systems offered by Victron to make configurations on them and also to work in parallel or create an isolated three-phase network.

In addition to their nominal power, Victron Inverters offer additional starting power to cope with punctual consumption peaks.

Features:

SinusMax - Superior design.

Developed for professional use, the Phoenix inverter range is ideal for countless applications.

The criteria used in its design was to produce a true sine wave inverter with optimized efficiency but without compromising performance.

By using high-frequency hybrid technology, the result is a product of the highest quality, compact in size, lightweight and capable of delivering power to any load without any problems.

Additional starting power.

One of the unique features of SinusMax technology is its very high starting power.

Conventional high-frequency technology does not offer such extraordinary performance.

Phoenix inverters, however, are well suited for powering difficult loads such as refrigerators, compressors, electric motors and similar appliances.

Virtually unlimited power thanks to parallel and three-phase operation.

Up to 6 inverter units can be operated in parallel to achieve higher power output.

Six 24/5000 units, for example, will provide 24 kW / 30 kVA of output power.

Configuration for three-phase operation is also possible.

Transferring the load to another AC source:

the automatic load transfer switcher.

If an automatic transfer switch is required, we recommend using the MultiPlus inverter/charger instead.

The switch is included with this product and the charger function of the MultiPlus can be disabled.

Computers and other electronic equipment will continue to operate without interruption, as the MultiPlus has a very short switching time (less than 20 milliseconds).

Computer interface.

All models have an RS-485 port.

All you need to connect to your PC is the MK2 interface.

This interface takes care of the galvanic isolation between the inverter and the computer, and converts the RS-485 socket to RS-232.

An RS-232 to USB conversion cable is also available.

Together with the VEConfigure software, all inverter parameters can be customized.

This includes output voltage and frequency, overvoltage or undervoltage settings and relay programming.

This relay can, for example, be used to signal several different alarm conditions, or to start a generator.

The inverters can also be connected to VENet, Victron Energy´s new power control network, or to other computer monitoring and control systems.